Cookie preferences
Active filters
LATEST NEWS
345 - 380 ET MARK III SILENT TPS COMPRESSOR...
Coltri 345 - 380 ETS Mark III Silent TPS Scuba Diving High Prressure Compressor: Ideal for intensive use in hot, poorly ventilated environments or in tropical countries. Designed with an improved cooling system and a filtering system with two Hyperfilters, these compressors are powered by an electric motor and equipped with four different pumping units, all in the TPS (Tropical Plus Superdry) version.
SPOOL 33 M
The spool is made from one piece of very durable Delrin. Can be used as a decompression or safety spool. Consists of the spool cca 33 m of 2 mm PA line and short double-ender. Spool dimension is 76 mm and width 50 mm.
KIDDO WING 12 L RED
WATERPROOF PACK BAGS
Waterproof bags manufactured in a double layer construction to ensure maximum durability.The inner waterproof bag is a heavy duty rubberized fabric, which can be easily repaired. This bag is equipped with a corrugated hose included.
RING 14 WING
235-315 ET SUPERSILENT TPS COMPRESSOR...
Coltri 235 - 315 - 330 ET Supersilent TPS ETS Commercial Diving High Pressure Compressor: Specially designed to minimize noise. It features an enhanced cooling and sound insulation system and an efficient filtering system with two Hyperfilters. Powered by an electric motor, it is equipped with four different pumping units, all in the TPS (Tropical Plus Superdry) version, and with an intuitive control panel. For longer filter life, the Tornado high pressure dryer is recommended.
copy of WATERPROOF PACK BAGS
Waterproof bags manufactured inWP-CONSTANT FLOAT BAG consisting of two bags: the main outer bag with the ability to adjust buoyancy in the same way as a drysuit and the inner vacuum bag to stabilize the payload and prevent movement during pitching and rolling. a double layer construction to ensure maximum durability.
345-380 ET SUPERSILENT TPS COMPRESSOR...
Coltri 345 - 380 ET Supersilent TPS ETS Scuba Diving High Pressure Compressor: Specially designed to minimize noise. It features an enhanced cooling and sound insulation system and an efficient filtering system with two Hyperfilters. Powered by an electric motor, it is equipped with four different pumping units, all in the TPS (Tropical Plus Superdry) version, and with an intuitive control panel. For longer filter life, the Tornado high pressure dryer is recommended.
RING 14 WING RED
450-550-650-750 ET SILENT COMPRESSOR...
Coltri 450-550-650-750 ETS Silent Scuba Diving High Pressure Compressor Threephasic: The SILENT model represents excellence in soundproofing. It has been designed to meet the needs of very intensive uses and when large filling capacities are required. Equipped with 4 front filling connections for high pressure hoses (from 232 to 420 bar), a control panel and an electrical display. They are equipped with a three-phase electric motor and powerful pumping units (450 550 650 750 depending on the specific model).
450-550-650-750 ET OPEN COMPRESSOR (Threephasic)
Coltri 450-550-650-750 ET Open threephasic Commercial Diving High Pressure Compressor: Open meets professional needs that require large charging capacities in hot, poorly ventilated or tropical countries. It is equipped with 4 front filling connections for high pressure hoses, an intuitive control panel and an electric motor. The pumping unit, chosen from the 4 most powerful, is exposed in the rear part of the structure to ensure a better cooling cycle. For longer filter life, the Tornado high pressure dryer is recommended
LP 250 NITROX ROTARY
Coltri LP250 Nitrox ROTARY for Scuba Diving: It consists of an industrial screw compressor that delivers air at a pressure of 10 bar to the Parker® membrane. The percentage of oxygen obtained at the outlet can be adjusted from 32% to 36% thanks to a valve accessible on the front side of the compressor. If connected to a compressor with pumping unit 315 (MCH 16), Nitrox at 32% can be obtained up to a pressure of 232 bar. The oxygen analyzer allows you to check the correct percentage, adjusting it through the appropriate valve.
LP 300 NITROX ROTARY
The Coltri LP300 Nitrox ROTARY model consists of an industrial screw compressor that delivers air at a pressure of 12 bar to a membrane that separates nitrogen and oxygen up to a maximum percentage of 40% O2. The enriched air can be compressed at a pressure of 232 bar in combination with a high pressure compressor. The percentage of oxygen obtained at the outlet can be regulated from 22.4% to 40% using a valve directly accessible on top of the compressor. The oxygen analyser allows checking of the correct percentage adjusted by means of the appropriate valve.
RING 17 WING
BASIC COMPLETE HARNESS + KNIVE
QUICK-LINK S.S.
BIG POCKET FOR SUIT
LP 600 NITROX ROTARY
At the top of the Nitrox line, the Coltri LP600 ROTARY system consists of an industrial screw compressor that delivers air at a pressure of 8 bar to a membrane that separates nitrogen and oxygen at atmospheric pressure until Nitrox 40% O2 is obtained and can be compressed at a pressure of 232 bar in combination with a high pressure compressor. The percentage of oxygen obtained at the outlet can be regulated from 22.4% to 40% using a valve directly accessible on top of the compressor. Exclusive to the the Heavy Duty line compressors.
COMPLETE ADJUSTABLE HARNESS + KNIFE
copy of COMPLETE ADJUSTABLE HARNESS + KNIFE